AC Power Conditioners

1 to 1500kVA
Single & Three Phase

Power Conditioners

Ashley-Edison (UK) Power Conditioners provide effective and reliable protection against voltage fluctuations and line disturbances, delivering an enhanced level of power protection commonly referred to as a ‘CLEAN’ supply.

Based on our existing ranges of Voltage Stabilisers, they offer an enhanced level of Transient Voltage Surge & Spike Suppression (TVSS) protection and deliver the added benefit of filtering out any electrical noise and interference present on the incoming utility supply.

It should be noted for applications, where electrical noise is not considered an issue, a Voltage Stabiliser will usually be the more appropriate and cost-efficient solution for delivering dependable and stable voltage.

To learn more about the comprehensive ranges of Power Conditioners available from Ashley-Edison (UK) please check-out the series listings and FAQ’s below: 

AC Power Line Conditioners

Digitally Enhanced Servo Electronic Design

Our Traditional Servo Electronic based Single and Three Phase Power Conditioners protect against voltage fluctuations and line disturbances.

Incorporating all the features and protection levels found in our Servo Electronic Stabilisers, as Power Conditioners they offer enhanced transient voltage surge defense and additional common and transverse electrical noise protection – delivering what is commonly referred to as a “CLEAN” supply. 

1 to 120 kVA

Servo Electronic Power Conditioners available

Single-Phase
2 Wire

1 to 10 kVA
Low Cost

Cost-Efficient Voltage Stabilisation and basic Power Conditioning for the smaller General Commercial & Industrial Applications

Single-Phase
2 Wire

5 to 50 kVA
(with -PC Option Fitted)

Ideal for most General Commercial & Industrial Applications

Also available in IP54 / NEMA 3 Style Enclosures (-IP54 Option)

Split Single-Phase 
2 to 3 Wire

6 to 100 kVA
(with -PC Option Fitted)

Specifically configured for electrical distribution systems commonly found in North American residential and light commercial buildings

Also available in IP54/NEMA 3 Style Enclosures (-IP54 Option)

Three-Phase
4 or 3 Wire

6 to 120 kVA
(with -PC Option Fitted)

Our Traditional Servo Electronic Stabiliser (SES) design digitally remastered for today’s demanding power environments

Also available in IP54/NEMA 3 Style Enclosures (-IP54 Option)

Digital Static Electronic Design

Incorporating all the features and protection levels found in our Static Electronic VR and ESR Voltage Stabilisers, through the integration on the ESR models of a double wound isolation transformer they deliver enhanced transient voltage surge defense and additional common and transverse electrical noise protection – providing what is commonly referred to as a “CLEAN” supply.

0.5 to 1500 kVA

Static Electronic Power Conditioners available

Single-Phase
2 Wire

0.5 to 5 kVA
Low Cost

Low Cost, virtually maintenance – free, Voltage Stabilisation and Power Conditioning for the Home and small Business Office

Alternative permissible input voltage window models available to accommodate even the worst of Power Environments

Single-Phase
2 Wire

3 to 150 kVA
(With -PC Option Fitted)

Ideal for most General Commercial & Industrial Applications where a virtually maintenance – free solution is required

Also available in IP54 / NEMA 3 Style Enclosures and as Power Line Conditioners

Three-Phase
4 or 3 Wire

6 to 400 kVA
(With -PC Option Fitted)

Highly efficient microprocessor control. Ideal for today’s modern General Commercial & Industrial Applications

Also available in IP54 / NEMA 3 Style Enclosures (-IP54 Option)

Three-Phase
4 or 3 Wire

450 to 1500 kVA
(With -PC Option Fitted)

Specifically configured for the needs of larger sites

Also available in IP54 / NEMA 3 Style Enclosures (-IP54 Option)

Power Conditioners FAQ's

Here you’ll find answers to some of the more frequently asked questions when looking for a Power Conditioner.

We also have a dedicated FAQ page where we try to answer other questions. Visit the FAQ page.

If you have a question that you can’t find the answer to, please let us know by using the Contact Us page.

Power Conditioners provide effective and reliable protection against not only voltage fluctuations and line disturbances, but also less common electrical noise. In essence a Power Conditioner delivers what is commonly referred to as a ‘CLEAN’ supply.

The term Power Conditioner / Power Conditioning is widely misunderstood and misquoted.  It is all too easy to ask for, or be told you need, a Power Conditioner (AKA Line Conditioner / Power Line Conditioner) when in fact, a less costly Voltage Stabiliser/ Regulator will normally be more than adequate for your needs.

So, to determine whether you actually need a Power Conditioner, you should really try to understand the utility supply problems you are experiencing. If your problem is simply voltage fluctuations and spikes, then a Voltage Stabiliser is your best and the most cost-efficient solution. However, if in addition, you are experiencing the less common problem of electrical noise coming down the line a Power Conditioner will indeed be the most appropriate solution.

Voltage Stabilisation is typically derived from either an inbuilt Static Electronic or Servo Electronic / Electro-Mechanic Voltage Stabiliser. Filters usually provide electrical noise protection on the smaller low-cost single-phase systems. For larger single and three-phase systems, the defence is derived by including an inbuilt isolation transformer, which also delivers enhanced protection against transient voltage and spikes.

For home audio/theatre applications, electrical noise on the incoming supply can often result in an annoying hum or buzz being heard. For the inexperienced ear, this would probably be virtually inaudible; however, it could prove highly irritating to a true audiophile.

Before one anticipates a solution to this problem, one should perhaps first carry out a simple test of measuring the supply volts at different times of the day as low frequency ‘hum’ (50/60Hz) can often be cured by ensuring that the audio amplifier is receiving the correct voltage from the mains supply. In days gone by, audio amplifier manufacturers were perhaps more aware of these problems and would often incorporate a voltage selector switch in the back of the amplifier.

A Power Conditioner would undoubtedly be a possible answer to the problem, especially if you are also suffering from a low or high utility mains voltage, but if the problem is basically electrical noise, then a quality Power Bar Filtered Strip could prove to be a far more cost-efficient solution and would probably be more readily available from the major online general retailers.