SVR-L 2P Series

Servo Electronic
Voltage Stabilisers & Power Line Conditioners
Two / Split Single Phase
5 to 100 kVA

SVR Series - Two / Split Single-Phase
Servo Electronic AC Voltage Stabilizers - 5 to 100kVA

Cost efficient voltage stabilization for US style Two-Phase / Split Single-Phase Output Electricity Distribution Systems commonly found in Residential & Light Commercial Buildings.

Now Digitally remastered to meet the demands of today’s modern age, our latest generation SVR-L-2P Series offerings include as standard many advanced protection features – usually only available from others as additional expensive add-on options!

Models are offered in 10 different power ratings from 5 to 100 kVA.

To learn more about the range of  Two Phase / Split Single-Phase SVR Voltage Stabilisers and Power Conditioners available from Ashley-Edison (UK), please check out the following listings, or download the brochure below:

Play Video

Standard Features include:

Automatic Digital Microprocessor Controlled Voltage Stabilization / Regulation
Static Electronic Design – Virtually Maintenance Free
Wide Permissible Input Voltage Window (up to ±40%)
TVSS – Transient Voltage Surge & Spike Suppression Protection
Inbuilt High Overload Capability
Over and Under Voltage Protection
Comprehensive Digital Front Panel with
– Input & Output Voltage Metering
– Output Current Metering
– Full Status Indication
Start-Up Load Protection
Class II Lightning Surge Arrestors
Automatic Electronic Bypass
Freestanding IP20 Indoor Enclosure
Hard Wire Input & Output
Built to comply with leading International Standards
Supplied with a 2 Year / 24 Months Warranty


Optional Features
available include:

Outdoor IP54 Enclosure (-IP54)
Stabiliser presented in endurable IP54 (BS / EN 60529) / NEMA 3 free-standing steel cubicles suitable for external use, or more challenging internal environments
Input Isolating Transformer (-PC)
Through the integration of a shielded isolation transformer, provides enhanced spike & electrical noise (Common Mode: 120db @ 100khz & Normal Mode Noise: 60db @ 100khz) suppression and neutral ground bonding. Delivers what is commonly referred to as a ‘CLEAN’ supply
AquaStop (-AS)
PCB protective coating offering protection against damp and moisture ingress 
Additional Digital Metering (-ADM)
Additional Digital Metering for Frequency & Power Factor 
Alternative Paint Colour (-RAL)
Alternative Paint Colour Finish – customer to specify

SELECT | Permissible Input Voltage Window Options (S*):

Swing OptionsNominal VoltageMax Model Rating
220V230V240V
S15±15%187 to 253V196 to 265V204 to 276V100 kVA
S20±20%176 to 264V184 to 276V192 to 288V75 kVA
S25±25%165 to 275V173 to 288V180 to 300V60 kVA
S30±30%154 to 286V161 to 299V168 to 312V30 kVA
S35±35%143 to 297V150 to 311V156 to 329V20 kVA
S40±40%132 to 308V136 to 322V144 to 336V20 kVA

SELECT | Required Power Rating:

Power Rating (kVA)Max Rating (Amps per Phase)SVR-L-2P-T1F Model No
(S*=Add Swing Option No)
220/110V230/115V240/120V
5 kVA22.7A / 2 x 22.7A21.7A / 2 x 21.7A20.8A / 2 x 20.8ASVR-5L-2P-T1F-S*
10 kVA45.5A / 2 x 45.5A43.5A / 2 x 43.5A41.7A / 2 x 41.7ASVR-10L-2P-T1F-S*
15 kVA68A / 2 x 68A65A / 2 x 65A62A / 2 x 62ASVR-15L-2P-T1F-S*
20 kVA90A / 2 x 90A87A / 2 x 87A83A / 2 x 83ASVR-20L-2P-T1F-S*
30 kVA136A / 2 x 136A130A / 2 x 130A125A / 2 x 125ASVR-30L-2P-T1F-S*
40 kVA181A / 2 x 181A173A / 2 x 173A166A / 2 x 166ASVR-40L-2P-T1F-S*
50 kVA227A / 2 x 227A217A / 2 x 217A208A / 2 x 208ASVR-50L-2P-T1F-S*
60 kVA272A / 2 x 272A260A / 2 x 260A250A / 2 x 250ASVR-60L-2P-T1F-S*
75 kVA340A / 2 x 340A326A / 2 x 326A312A / 2 x 312ASVR-75L-2P-T1F-S*
80 kVA454A / 2 x 454A434A / 2 x 434A416A / 2 x 416ASVR-100L-2P-T1F-S*

Note: All SVR-L-2P-T1F Stabilisers are designed to support the full load at minimum input volts and maximum ambient temperature.

General Technical Specification

General:
 – Design Topology:Digital Buck-Boost SCR Design Topology
 – Phase:Two-Phase, 2 Wire (2P+G/E)
 – Power Ratings:10 Model Ratings-
5kVA, 10kVA, 15kVA, 20kVA, 30kVA, 40kVA, 50kVA, 60kVA, 75kVA & 100kVA
 – Frequency:50 / 60Hz (35 to 63Hz)
 – Power Factor:The Power Factor has no effect on performance providing the stabilizer is being used within its rated capacity
Input:
 – Nominal Voltage:220V -230V – 240V, Two-Phase, 2 Wire
 – Input Voltage Window Options (S*):S15Nominal Voltage ±15% (up to 100KVA)
 S20Nominal Voltage ±20% (up to 75KVA)
 S25Nominal Voltage ±25% (up to 60KVA)
 S30Nominal Voltage ±30% (up to 30KVA)
 S35Nominal Voltage ±35% (up to 20KVA)
 S40Nominal Voltage ±40% (up to 20KVA)
Output:
 – Voltage:220/110V -230/115V – 240/120V, Single Phase, 3 Wire (Customer to Specify)
 – Voltage Accuracy:S15 to S25 Option Models±3% (Default) – adjustable ±1% to ±5% via Front Display Panel
 S30 to S40 Option Models±3% (Default) – adjustable ±3% to ±5% via Front Display Panel
 – Correction Time:Typically a 10% supply variation will be corrected to within 2.5% in 0.6 seconds
 – Efficiency:≥98%
– Overload Ratings:10 x max. current rating for 2 seconds
3 x max. current rating for 1 minute
2 x max. current rating for 2 minutes
Display Panel – Metering, Alerts & Communication:
 – Front Display Panel:Digital Metering:Input Volts, Output Volts, and Load
 Status Indication:Overload, Over-Volts, Under-Volts,  & Fuse Blown
 Display Settable Parameters:Output Voltage, Output Voltage Accuracy, Correction Time, Over-Voltage Level, Under-Voltage Level & Over Current Limit
 – Interface:RS-485 – DB9 Pin Style Port on the SCP
Protection Features:
 – Surge Protection:TVSS – Protects loads against high-energy Spikes and Transient Voltages
 – Lightning Surge Protection:Class II SPD – protection against extremely high voltage surges and transients caused by lightning strikes on the utility mains supply line
 – Input Breaker:Standard on all models – delivers over current input protection
 – Manual Bypass:Break Before Make’ bypass facility (with mechanical interlocking) offering the ability to route the supply feed to bypass the stabiliser/conditioner. Useful when performing deep maintenance on the system, or in the highly unlikely event of a system malfunction.
 – Output Isolation:Automatic disconnection of the load in the event of a fault condition being detected
Environmental:
 – Operating Temperature Range:-15°C to +45°C
Derate by 2% for each additional °C up to max 60°C
 – Maximum Altitude:1000 meters (derate by 2.5% per additional 500 meters)
 – Relative Humidity:Suitable for indoor tropical use – 0 to 95% (non-condensing)
 – Harmonic Distortion:None introduced
 – Audible Noise:@ 1 meter 50 to 65 dBA (dependent on model rating)
Physical:
 – Power Connections:Hardwire Input & Output
 – Construction:Enclosures to IP20 / NEMA 1 Style – BS EN 60529  (Option – Outdoor IP54/NEMA 3 Style)
 – Paint Colour:RAL 1013 (Oyster White – Epoxy Powder Coating) – Other paint colours on specific request
 – Dimensions & Weights:Dependent on model rating and configuration
Sizes and weights available on individual request
Certification & Conformance:
 – EMC Conformance:BS EN 55022 and relevant parts of BS EN 61000
 – CE Certification:CE Marked – 2014/30/EU (The EMC Directive) and 2014/35/EU (The Low Voltage Directive)
 – Warranty:2 Years / 24 Months from date of supply
Optional Add-Ons:
 – Outdoor IP54 Enclosure (-IP54)Stabiliser presented in endurable IP54 (BS / EN 60529) / NEMA 3 free-standing steel cubicles suitable for external use, or more challenging internal environments
 – Input Isolating Transformer (-PC)Through the integration of a shielded isolation transformer, provides enhanced spike & electrical noise (Common Mode: 120db @ 100khz & Normal Mode Noise: 60db @ 100khz) suppression and neutral ground bonding. Delivers what is commonly referred to as a ‘CLEAN’ supply
 – AquaStop (-AS)PCB protective coating offering protection against damp and moisture ingress
 – Additional Digital Metering (-ADM)Additional Digital Metering for Frequency & Power Factor
 – Alternative Paint Colour (-RAL)Alternative Paint Colour Finish – customer to specify

Note:
All SVR Stabilisers are designed to support the full load at minimum input volts and maximum ambient temperature.

Sales & Support

Data Sheet

– L Series  [220/110V, 230/115V, or 240/120V Models]

Guide Specification

Operator / User Manual

CE Certification

SVR Series Single Phase Servo Electronic AC Voltage Stabilisers / Conditioners comply with the relevant European Union (EU) health, safety and environmental protection directives and regulations and are duly CE marked.

Ashley-Edison Declaration

Machine (MD) Directive – 2006/42/EC – in force from December 2009

EMC Directive – 2014/30/EU – in force from April 2016

Low Voltage Directive – 2014/35/EU – in force from April 2016

Independant 3rd party verification certificate

Machine (MD) Directive – 2006/42/EC – in force from December 2009

EMC Directive – 2014/30/EU – in force from April 2016

Low Voltage Directive – 2014/35/EU – in force from April 2016

If you do not find the Voltage Stabiliser or Power Line Conditioner that meets your application’s exact needs, please contact us with your specific detailed requirements.