Rack Mountable Voltage Stabilizers

SES-R Series - Single Phase - 3 to 15 kVA

Cost efficient voltage stabilisation specifically designed for ease of installation and use within a 19” rack environment.

Features

 -

19” Rack Mountable - 5.4U High

Single Phase Voltage Stabilizer SES RM

 -

Step-Less Voltage Control

 -

Wide range of permissible input voltage windows (±15% to ±40%)

 -

±1% Output Voltage Accuracy

 -

Inbuilt TVSS - Transient Voltage Surge & Spike Suppression

 -

High Overload Capability

 -

Start Up Load Protection

 -

Over / Under Voltage Protection

 -

Bypass Control Switch

 -

Input Breaker fitted as Standard

 -

Output Voltmeter

 -

Extremely Low Maintenance

 -

3 Years Standard Warranty

To learn more please check-out the series listings below:

 
   Watch the Video
SES-R-Video
 

  The Ranges

  Series

  Voltages

  H Series

  International Voltages (220 - 240V)   

  L Series

  US  Voltages (100 - 127V)

  HL Series  

  Step-Down Voltage Converter (Int to US)

  LH Series

  Step-Up Voltage Converter   (US to Int)

For full Series details see below.

 pdf  SES-R Brochure 

Introduction

SES-H-R Series - 3 to 15 kVA
Single Phase Rack Mountable Servo Electronic AC Voltage Stabilisers

1P 2W Solution

Input / Output:  220V, 230V & 240V AC -  50/60Hz


Our feature rich Single Phase offerings presented in a 19" Rack Mountable format configured for International / European voltages. Ideal for telecom and Internet rack cabinet applications.

Standard Permissible Input Voltage Window Options

SWING-SES-H-R

> View Input Voltage Swings

In situations where there is a reasonably good mains supply, a Stabiliser offering an input variation swing of ±15% (S15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the Stabiliser.

TIP - The wider the permissible input voltage window you wish the Stabiliser to accomodate and the more accurate the voltage you require on the output, the more expensive the Stabiliser. So, when selecting the most appropriate and cost efficient model for your application, it pays to know the state of the utility mains supply on site and the designed input voltage tolerances of the load equipment you wish to protect.

 

Downloads

General Series Catalogue: pdf
Guide Specification: doc
Servo Electronic Overview Brochure: pdf



 

 

Pricing

To obtain a personal price, or to discuss further how we might be able to help your organisation, please feel free

 to either e-mail us
 or call us on +44 (0)870 240 6162
 

Get ADOBE READER  Get Adobe Flash Player

General Technical Specification

  Technology:

Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).

Permissible Input Voltage Window Options >

 

220V or 230V or 240V AC (Customer to Specify), Single Phase, 2 Wire (1 Phase + Neutral + G/E)

With Output Voltage Accuracy

±1%

±3%

±5%

Ratings

*S15 Models– Input Window

± 15%

-17% /+18%

-19% /+21%

3 to 15 kVA

*S20 Models– Input Window

± 20%

-22% / +23%

-24% / +26%

3 to 15 kVA

*S25 Models– Input Window

± 25%

-27% / +28%

-29% / +31%

3 to 10 kVA

*S30 Models– Input Window

± 30%

-32% / +33%

-34% / +36%

3 to 7.5 kVA

*S35 Models– Input Window

± 35%

-37% / +38%

-39% / +41%

3 to 7.5 kVA

*S40 Models– Input Window

± 40%

-42% / +43%

-44% / +46%

3 to 5 kVA

  Output Voltage:

220V, 230V or 240V AC (Customer to Specify), Single Phase, 2 Wire (1 Phase + Neutral + G/E)

The permissible input voltage window is relative to the pre-set output voltage.

  Output Voltage Accuracy:

± 1%, ± 3% or ± 5% - auto selection based on input voltage swing

  Frequency:

47 to 65 Hz

  Response Time:

< 1.5 ms

  Correction Time:

A 10% supply variation will be corrected to within 2.5% in 0.6 seconds.

  Efficiency:

98%

  Power Factor:

Any Lagging to 0.95 leading

  Surge Ratings:

10 x max current rating for 2 seconds

 

3 x max current rating for 1 minute

 

2 x max current rating for 5 minutes

  Surge Suppression:

TVSS - Protects loads against high energy Spikes and Transient Voltages

  Total Harmonic Distortion:

 < 1%

  Soft-Switch-On:

Ensures the output voltage is set to a minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start-up voltage surges.

  Environment:

Temperature Range -15°to 45° C

 

Derate by 2% for each additional °C up to max 60°C

 

Suitable for indoor tropical use 95% RH (non-condensing)

 

Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

  Paint Colour:

RAL 7032 (Grey - Powder Coat)

  Construction:

19” Rack Mountable Enclosures to IP20 (NEMA 1 Style), BS EN 60529

  Conformance:

Complies with BS EN 55022 and the relevant parts of BS EN 61000 series of standards

  CE Conformity:

CE Marked - being fully compliant with European Union Directives 2004/108/EC (replaced EMC Directive 89/336/EEC from July 2009) and 2006/95/EC (The Low Voltage Directive in force from January 2007)

  Warranty:

Three (3) Years / Thirty Six (36) Months from date of supply.

   Standard Features:

Input Circuit Breaker

Input Output Terminals

Bypass Control Switch

Output Voltmeter

Over / Low Voltage Protection

 

 Optional Accessories:

No Volt Contacts

 

Lightning Surge Arrestors

 

AquaStop Protective Coating - protection against damp and moisture ingress

 

 

Please Note– These Stabilisers are not designed to support / protect voltage “back feed” applications, where energy is required to be also fed back into the utility supply.

S15 Models - Input Voltage Swing +/-15% - 3 to 15 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@220V @230V @240V
3 kVA 13.6 13.0 12.5 SES-3H-S15-R RM19 480 x 240 (5.4) x 400  28
5 kVA 23 22 21 SES-5H-S15-R RM19 480 x 240 (5.4) x 400   30
10 kVA 45 44 42 SES-10H-S15-R RM19 480 x 240 (5.4) x 400  36
15 kVA 68 65 63 SES-15H-S15-R RM19 480 x 240 (5.4) x 400  53
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S20 Models - Input Voltage Swing +/-20% - 3 to 15 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@220V @230V @240V
3 kVA 13.6 13.0 12.5 SES-3H-S20-R RM19 480 x 240 (5.4) x 400  30
5 kVA 23 22 21 SES-5H-S20-R RM19 480 x 240 (5.4) x 400   36
10 kVA 45 44 42 SES-10H-S20-R RM19 480 x 240 (5.4) x 400  45
15 kVA 68 65 63 SES-15H-S20-R RM19 480 x 240 (5.4) x 400  60
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S25 Models - Input Voltage Swing +/-25% - 3 to 10 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@220V @230V @240V
3 kVA 13.6 13.0 12.5 SES-3H-S25-R RM19 480 x 240 (5.4) x 400  34
5 kVA 23 22 21 SES-5H-S25-R RM19 480 x 240 (5.4) x 400   38
10 kVA 45 44 42 SES-10H-S25-R RM19 480 x 240 (5.4) x 400  48
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S30 Models - Input Voltage Swing +/-30% - 3 to 7.5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@220V @230V @240V
3 kVA 13.6 13.0 12.5 SES-3H-S30-R RM19 480 x 240 (5.4) x 400  37
5 kVA 23 22 21 SES-5H-S30-R RM19 480 x 240 (5.4) x 400   40
7.5 kVA 34 32 31 SES-7.5H-S30-R RM19 480 x 240 (5.4) x 400  48
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S35 Models - Input Voltage Swing +/-35% - 3 to 7.5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@220V @230V @240V
3 kVA 13.6 13.0 12.5 SES-3H-S35-R RM19 480 x 240 (5.4) x 400  41
5 kVA 23 22 21 SES-5H-S35-R RM19 480 x 240 (5.4) x 400   48
7.5 kVA 34 32 31 SES-7.5H-S35-R RM19 480 x 240 (5.4) x 400  50
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S40 Models - Input Voltage Swing +/-40% - 3 to 5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@220V @230V @240V
3 kVA 13.6 13.0 12.5 SES-3H-S40-R RM19 480 x 240 (5.4) x 400  44
5 kVA 23 22 21 SES-5H-S40-R RM19 480 x 240 (5.4) x 400   50
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

Standard Enclosure Type

SES-R Rack Mountable Voltage StabilizerSolid and Robust Construction

SES-R Series Single Phase Rack-Mountable AC Voltage Stabilisers are housed in robust air-cooled 5.4U high rack mountable steel enclosures, primarily intended for telecoms and Internet Administration 19" rack environments. These enclosures offer removable panels for ease of installation and servicing.

 

  RM19 Style Enclosure
   Rear Cable Entry
RM19 Style Enclosure 
 
   Physical Size:
RM19 480(W) x 240(H) x 420(D)mm - 5.4U High 19"(W) x 9.5"(H) x 15.8"(D) inches

 

 
   Note:    For packed, sizes and weights please refer to the FAQ Section of this site.

     Copyright © Ashley-Edison (UK) reserves the right to change any or all of the specifications indicated or implied without prior notice. E&OE

Introduction

 US Voltages

SES-L-R Series - 3 to 10 kVA
Single Phase Rack Mountable Servo Electronic AC Voltage Stabilizers 

1P 2W Solution

Input / Output:  100V, 110V, 115V, 120V & 127V AC  -  50/60Hz


Our feature rich Single Phase offerings presented in a 19" Rack Mountable format configured for US voltages. Ideal for telecom and Internet rack cabinet applications.

Standard Permissible Input Voltage Window Options

SWING-SES-L-R

> View Input Voltage Swings

In situations where there is a reasonably good mains supply, a Stabilizer offering an input variation swing of ±15% (S15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the Stabilizer.

TIP - The wider the permissible input voltage window you wish the Stabilizer to accomodate and the more accurate the voltage you require on the output, the more expensive the Stabilizer. So, when selecting the most appropriate and cost efficient model for your application, it pays to know the state of the utility mains supply on site and the designed input voltage tolerances of the load equipment you wish to protect.

 

Downloads

General Series Catalog: pdf
Guide Specification: doc
Servo Electronic Overview Brochure: pdf

 

 

 

Pricing

To obtain a personal price, or to discuss further how we might be able to help your organisation, please feel free

 to either e-mail us
 or call us on +44 (0)870 240 6162
 

Get ADOBE READER  Get Adobe Flash Player

General Technical Specification

  Technology:

Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).

Permissible Input Voltage Window Options >

 

100V or 110V or 115V or 120V or 127V AC, Single Phase, 2 Wire (1 Phase + Neutral + G/E)

With Output Voltage Accuracy

±1%

±3%

±5%

Ratings

*S15 Models– Input Window

± 15%

-17% /+18%

-19% /+21%

3 to 10 kVA

*S20 Models– Input Window

± 20%

-22% / +23%

-24% / +26%

3 to 10 kVA

*S25 Models– Input Window

± 25%

-27% / +28%

-29% / +31%

3 to 10 kVA

*S30 Models– Input Window

± 30%

-32% / +33%

-34% / +36%

3 to 7.5 kVA

*S35 Models– Input Window

± 35%

-37% / +38%

-39% / +41%

3 to 7.5 kVA

  Output Voltage:

100V, 110V, 115V, 120V or 127V AC (Customer to Specify), Single Phase, 2 Wire (1 Phase + Neutral + G/E)
The permissible input voltage window is relative to the pre-set output voltage.

  Output Voltage Accuracy:

± 1%, ± 3% or ± 5% - auto selection based on input voltage swing

  Frequency:

47 to 65 Hz

  Response Time:

< 1.5 ms

  Correction Time:

A 10% supply variation will be corrected to within 2.5% in 0.6 seconds.

  Efficiency:

98%

  Power Factor:

Any Lagging to 0.95 leading

  Surge Ratings:

10 x max current rating for 2 seconds

 

3 x max current rating for 1 minute

 

2 x max current rating for 5 minutes

  Surge Suppression:

TVSS - Protects loads against high energy Spikes and Transient Voltages

  Total Harmonic Distortion:

 < 1%

  Soft-Switch-On:

Ensures the output voltage is set to a minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start-up voltage surges.

  Environment:

Temperature Range -15°to 45° C

 

Derate by 2% for each additional °C up to max 60°C

 

Suitable for indoor tropical use 95% RH (non-condensing)

 

Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

  Paint Colour:

RAL 7032 (Grey - Powder Coat)

  Construction:

Enclosures to IP20 (NEMA 1 Style), BS EN 60529

  Conformance:

Complies with BS EN 55022 and the relevant parts of BS EN 61000 series of standards

  CE Conformity:

CE Marked - being fully compliant with European Union Directives 2004/108/EC (replaced EMC Directive 89/336/EEC from July 2009) and 2006/95/EC (The Low Voltage Directive in force from January 2007)

  Warranty:

Three (3) Years / Thirty Six (36) Months from date of supply.

   Standard Features:

Input Circuit Breaker

Input Output Terminals

Bypass Control Switch

Output Voltmeter

Over / Low Voltage Protection

 

  Optional Accessories:

No Volt Contacts

 

Lightning Surge Arrestors

 

AquaStop Protective Coating - protection against damp and moisture ingress

 

 

Please Note– These Stabilisers are not designed to support / protect voltage “back feed” applications, where energy is required to be also fed back into the utility supply.

S15 Models - Input Voltage Swing +/-15% - 3 to 10 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
3 kVA 30 27 26 25 23 SES-3L-S15-R RM19 480 x 240 (5.4) x 400  28
5 kVA 50 45 43 41 39 SES-5L-S15-R RM19 480 x 240 (5.4) x 400   30
10 kVA 100 90 87 83 78 SES-10L-S15-R RM19 480 x 240 (5.4) x 400  36
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S20 Models - Input Voltage Swing +/-20% - 3 to 10 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
3 kVA 30 27 26 25 23 SES-3L-S20-R RM19 480 x 240 (5.4) x 400  30
5 kVA 50 45 43 41 39 SES-5L-S20-R RM19 480 x 240 (5.4) x 400   36
10 kVA 100 90 87 83 78 SES-10L-S20-R RM19 480 x 240 (5.4) x 400  45
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S25 Models - Input Voltage Swing +/-25% - 3 to 10 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
3 kVA 30 27 26 25 23 SES-3L-S25-R RM19 480 x 240 (5.4) x 400  34
5 kVA 50 45 43 41 39 SES-5L-S25-R RM19 480 x 240 (5.4) x 400   38
10 kVA 100 90 87 83 78 SES-10L-S25-R RM19 480 x 240 (5.4) x 400  48
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S30 Models - Input Voltage Swing +/-30% - 3 to 7.5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
3 kVA 30 27 26 25 23 SES-3L-S30-R RM19 480 x 240 (5.4) x 400  37
5 kVA 50 45 43 41 39 SES-5L-S30-R RM19 480 x 240 (5.4) x 400   40
7.5 kVA 75 68 65 62 59 SES-7.5L-S30-R RM19 480 x 240 (5.4) x 400  48
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S35 Models - Input Voltage Swing +/-35% - 3 to 7.5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
3 kVA 30 27 26 25 23 SES-3L-S35-R RM19 480 x 240 (5.4) x 400  41
5 kVA 50 45 43 41 39 SES-5L-S35-R RM19 480 x 240 (5.4) x 400   48
7.5 kVA 75 68 65 62 59 SES-7.5L-S35-R RM19 480 x 240 (5.4) x 400  50
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

Standard Enclosure Type

SES-R Rack Mountable Voltage StabilizerSolid and Robust Construction

SES-R Series Single Phase Rack-Mountable AC Voltage Stabilisers are housed in robust air-cooled 5.4U high rack mountable steel enclosures, primarily intended for telecoms and Internet Administration 19" rack environments. These enclosures offer removable panels for ease of installation and servicing.

 

  RM19 Style Enclosure
   Rear Cable Entry
RM19 Style Enclosure 
 
   Physical Size:
RM19 480(W) x 240(H) x 420(D)mm - 5.4U High 19"(W) x 9.5"(H) x 15.8"(D) inches

 

 
   Note:    For packed, sizes and weights please refer to the FAQ Section of this site.

     Copyright © Ashley-Edison (UK) reserves the right to change any or all of the specifications indicated or implied without prior notice. E&OE

Introduction

SES-HL-R Series - 3 to 5 kVA
Single Phase Rack Mountable Servo Electronic Step-Down AC Voltage Stabilisers / Voltage Converters

1P 2W Solution

Input:      220V, 230V or 240V AC -  50/60Hz

Output:   100V, 110V, 115V, 120V or 127V AC -  50/60Hz


Step-Down Rack Mountable Voltage Converters which also deliver protection against the vagaries of voltage fluctuations on the input utility supply. Ideal for applications where the utility supply voltage is different from the load equipment’s requirement eg. US designed equipment used in Europe.

Standard Permissible Input Voltage Window Options

SWING-SES-HL-R

> View Input Voltage Swings

In situations where there is a reasonably good mains supply, a Stabiliser offering an input variation swing of ±15% (S15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the Stabiliser.

TIP - The wider the permissible input voltage window you wish the Stabiliser to accomodate and the more accurate the voltage you require on the output, the more expensive the Stabiliser. So, when selecting the most appropriate and cost efficient model for your application, it pays to know the state of the utility mains supply on site and the designed input voltage tolerances of the load equipment you wish to protect.

 

Downloads

General Series Catalogue: pdf
Guide Specification: doc
Servo Electronic Overview Brochure: pdf



 

 

Pricing

To obtain a personal price, or to discuss further how we might be able to help your organisation, please feel free

 to either e-mail us
 or call us on +44 (0)870 240 6162
 

Get ADOBE READER  Get Adobe Flash Player

General Technical Specification

  Technology:

Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).

Permissible Input Voltage Window Options >

220V or 230V or 240V AC (Customer to Specify), Single Phase, 2 Wire (1 Phase + Neutral + G/E)

With Output Voltage Accuracy

±1%

±3%

±5%

Ratings

*S15 Models– Input Window

± 15%

-17% /+18%

-19% /+21%

3 to 5 kVA

*S20 Models– Input Window

± 20%

-22% / +23%

-24% / +26%

3 to 5 kVA

*S25 Models– Input Window

± 25%

-27% / +28%

-29% / +31%

3 to 5 kVA

  Output Voltage:

100V, 110V, 115V, 120V or 127V AC (Customer to Specify), Single Phase, 2 Wire (1 Phase + Neutral + G/E)

  Output Voltage Accuracy:

± 1%, ± 3% or ± 5% - auto selection based on input voltage swing

  Frequency:

47 to 65 Hz

  Response Time:

< 1.5 ms

  Correction Time:

A 10% supply variation will be corrected to within 2.5% in 0.6 seconds.

  Efficiency:

98%

  Power Factor:

Any Lagging to 0.95 leading

  Surge Ratings:

10 x max current rating for 2 seconds

 

3 x max current rating for 1 minute

 

2 x max current rating for 5 minutes

  Surge Suppression:

TVSS - Protects loads against high energy Spikes and Transient Voltages

  Total Harmonic Distortion:

 < 1%

  Soft-Switch-On:

Ensures the output voltage is set to a minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start-up voltage surges.

  Environment:

Temperature Range -15°to 45° C

 

Derate by 2% for each additional °C up to max 60°C

 

Suitable for indoor tropical use 95% RH (non-condensing)

 

Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

  Paint Colour:

RAL 7032 (Grey - Powder Coat)

  Construction:

Enclosures to IP20 (NEMA 1 Style), BS EN 60529

  Conformance:

Complies with BS EN 55022 and the relevant parts of BS EN 61000 series of standards

  CE Conformity:

CE Marked - being fully compliant with European Union Directives 2004/108/EC (replaced EMC Directive 89/336/EEC from July 2009) and 2006/95/EC (The Low Voltage Directive in force from January 2007)

  Warranty:

Three (3) Years / Thirty Six (36) Months from date of supply.

   Standard Features:

Input Circuit Breaker

Input Output Terminals

Bypass Control Switch

Output Voltmeter

Over / Low Voltage Protection

 

  Optional Accessories:

No Volt Contacts

 

Lightning Surge Arrestors

 

AquaStop Protective Coating - protection against damp and moisture ingress

 

 

Please Note– These Stabilisers are not designed to support / protect voltage “back feed” applications, where energy is required to be also fed back into the utility supply.

S15 Models - Input Voltage Swing +/-15% - 3 to 5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
3 kVA 30 27 26 25 23 SES-3HL-S15-R RM19 480 x 240 (5.4) x 400  46
5 kVA 50 45 43 41 39 SES-5HL-S15-R RM19 480 x 240 (5.4) x 400   56
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S20 Models - Input Voltage Swing +/-20% - 3 to 5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
3 kVA 30 27 26 25 23 SES-3HL-S20-R RM19 480 x 240 (5.4) x 400  48
5 kVA 50 45 43 41 39 SES-5HL-S20-R RM19 480 x 240 (5.4) x 400   62
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S25 Models - Input Voltage Swing +/-25% - 3 to 5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
3 kVA 30 27 26 25 23 SES-3HL-S25-R RM19 480 x 240 (5.4) x 400  52
5 kVA 50 45 43 41 39 SES-5HL-S25-R RM19 480 x 240 (5.4) x 400   62
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

Standard Enclosure Type

SES-R Rack Mountable Voltage StabilizerSolid and Robust Construction

SES-R Series Single Phase Rack-Mountable AC Voltage Stabilisers are housed in robust air-cooled 5.4U high rack mountable steel enclosures, primarily intended for telecoms and Internet Administration 19" rack environments. These enclosures offer removable panels for ease of installation and servicing.

 

  RM19 Style Enclosure
   Rear Cable Entry
RM19 Style Enclosure 
 
   Physical Size:
RM19 480(W) x 240(H) x 420(D)mm - 5.4U High 19"(W) x 9.5"(H) x 15.8"(D) inches

 

 
   Note:    For packed, sizes and weights please refer to the FAQ Section of this site.

     Copyright © Ashley-Edison (UK) reserves the right to change any or all of the specifications indicated or implied without prior notice. E&OE

Introduction


US Voltages

SES-LH-R Series - 3 to 5 kVA
Single Phase Rack Mountable Servo Electronic Step-Up AC Voltage Stabilizers / Voltage Converters

 3P 4W Solution

Input:     100V, 110V, 115V, 120V or 127V AC -  50/60Hz

Output:  220V, 230V or 240V AC -  50/60Hz

 

Step-Up Voltage Converters which also deliver protection against the vagaries of voltage fluctuations on the input utility supply. Ideal for applications where the utility supply voltage is different from the load equipment’s requirement.

Standard Permissible Input Voltage Window Options

SWING-SES-LH-3P-S-R

> View Input Voltage Swings

In situations where there is a reasonably good mains supply, a Stabilizer offering an input variation swing of ±15% (S15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the Stabilizer.

TIP - The wider the permissible input voltage window you wish the Stabilizer to accomodate and the more accurate the voltage you require on the output, the more expensive the Stabilizer. So, when selecting the most appropriate and cost efficient model for your application, it pays to know the state of the utility mains supply on site and the designed input voltage tolerances of the load equipment you wish to protect.

 

Downloads

General Series Catalog: pdf
Guide Specification: doc
Servo Electronic Overview Brochure: pdf

 

 

 

Pricing

To obtain a personal price, or to discuss further how we might be able to help your organisation, please feel free

 to either e-mail us
 or call us on +44 (0)870 240 6162
 

Get ADOBE READER  Get Adobe Flash Player

General Technical Specification

  Technology:

Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).

Permissible Input Voltage Window Options >

100V, 110V, 115V, 120V or 127V AC (Customer to Specify), Single Phase, 2 Wire (1 Phase + Neutral + G/E)

With Output Voltage Accuracy

±1%

±3%

±5%

Ratings

*S15 Models– Input Window

± 15%

-17% /+18%

-19% /+21%

3 to 5 kVA

*S20 Models– Input Window

± 20%

-22% / +23%

-24% / +26%

3 to 5 kVA

*S25 Models– Input Window

± 25%

-27% / +28%

-29% / +31%

3 to 5 kVA

  Output Voltage:

220V or 230V or 240V AC (Customer to Specify), Single Phase, 2 Wire (1 Phase + Neutral + G/E)

  Output Voltage Accuracy:

± 1%, ± 3% or ± 5% - auto selection based on input voltage swing

  Frequency:

47 to 65 Hz

  Response Time:

< 1.5 ms

  Correction Time:

A 10% supply variation will be corrected to within 2.5% in 0.6 seconds.

  Efficiency:

98%

  Power Factor:

Any Lagging to 0.95 leading

  Surge Ratings:

10 x max current rating for 2 seconds

 

3 x max current rating for 1 minute

 

2 x max current rating for 5 minutes

  Surge Suppression:

TVSS - Protects loads against high energy Spikes and Transient Voltages

  Total Harmonic Distortion:

 < 1%

  Soft-Switch-On:

Ensures the output voltage is set to a minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start-up voltage surges.

  Environment:

Temperature Range -15°to 45° C

 

Derate by 2% for each additional °C up to max 60°C

 

Suitable for indoor tropical use 95% RH (non-condensing)

 

Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

  Paint Colour:

RAL 7032 (Grey - Powder Coat)

  Construction:

Enclosures to IP20 (NEMA 1 Style), BS EN 60529

  Conformance:

Complies with BS EN 55022 and the relevant parts of BS EN 61000 series of standards

  CE Conformity:

CE Marked - being fully compliant with European Union Directives 2004/108/EC (replaced EMC Directive 89/336/EEC from July 2009) and 2006/95/EC (The Low Voltage Directive in force from January 2007)

  Warranty:

Three (3) Years / Thirty Six (36) Months from date of supply.

   Standard Features:

Input Circuit Breaker

Input Output Terminals

Bypass Control Switch

Output Voltmeter

Over / Low Voltage Protection

 

  Optional Accessories:

No Volt Contacts

 

Lightning Surge Arrestors

 

AquaStop Protective Coating - protection against damp and moisture ingress

 

 

Please Note– These Stabilisers are not designed to support / protect voltage “back feed” applications, where energy is required to be also fed back into the utility supply.

S15 Models - Input Voltage Swing +/-15% - 3 to 5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@220V @230V @240V
3 kVA 13.6 13.0 12.5 SES-3LH-S15-R RM19 480 x 240 (5.4) x 400  46
5 kVA 23 22 21 SES-5LH-S15-R RM19 480 x 240 (5.4) x 400   56
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S20 Models - Input Voltage Swing +/-20% - 3 to 5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@220V @230V @240V
3 kVA 13.6 13.0 12.5 SES-3LH-S20-R RM19 480 x 240 (5.4) x 400  48
5 kVA 23 22 21 SES-5LH-S20-R RM19 480 x 240 (5.4) x 400   62
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S25 Models - Input Voltage Swing +/-25% - 3 to 5 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H (U) x D (mm)

Weight
(Kgs)

@220V @230V @240V
3 kVA 13.6 13.0 12.5 SES-3LH-S25-R RM19 480 x 240 (5.4) x 400  52
5 kVA 23 22 21 SES-5LH-S25-R RM19 480 x 240 (5.4) x 400   62
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

Standard Enclosure Type

SES-R Rack Mountable Voltage StabilizerSolid and Robust Construction

SES-R Series Single Phase Rack-Mountable AC Voltage Stabilisers are housed in robust air-cooled 5.4U high rack mountable steel enclosures, primarily intended for telecoms and Internet Administration 19" rack environments. These enclosures offer removable panels for ease of installation and servicing.

 

  RM19 Style Enclosure
   Rear Cable Entry
RM19 Style Enclosure 
 
   Physical Size:
RM19 480(W) x 240(H) x 420(D)mm - 5.4U High 19"(W) x 9.5"(H) x 15.8"(D) inches

 

 
   Note:    For packed, sizes and weights please refer to the FAQ Section of this site.

     Copyright © Ashley-Edison (UK) reserves the right to change any or all of the specifications indicated or implied without prior notice. E&OE




This website uses 'cookies' to give you the best, most relevant experience. Using this website means you’re OK with this. You can change which cookies are set at any time - and find out more about them - by following this link, or by clicking the cookie link at the bottom of any page.
This message will close within 20 seconds.

Accept all cookies