Single Phase Voltage Stabilizers

SES Series - 1 to 100 kVA

With a fast speed of response and unparalleled inbuilt protection features, SES Single Phase Servo Electronic based Voltage Stabilizers deliver cost efficient voltage stabilisation, voltage surge and spike protection without compromising on technical performance or quality.

Features

 -

Step-Less Voltage Control

PP-SES-1P

 -

Wide range of permissible input voltage windows (±15% to ±40%)

 -

±1% Output Voltage Accuracy

 -

Inbuilt TVSS - Transient Voltage Surge & Spike Suppression

 -

High Overload Capability

 -

Start Up Load Protection

 -

Input Breaker fitted as Standard

 -

3 Years Warranty

 -

Extremely Low Maintenance

To learn more please check-out the series listings below

 
 Watch the Video
SES-1P-Video
 

 The Ranges

  Series

  Voltages

  H Series

  International Voltages (220 - 240V)   

  L Series

  US  Voltages (100 - 127V)

  HL Series  

  Step-Down Voltage Converter (Int to US)

  LH Series

  Step-Up Voltage Converter   (US to Int)

For full Series details see below.

Introduction

SES-H-S Series - 1 to 100 kVA
Single Phase Servo Electronic AC Voltage Stabilisers

1P 2W Solution

Input / Output:  220V, 230V & 240V AC -  50/60Hz


Our most popular and feature rich Single Phase offering configured for International / European voltages. Ideal for over 95% of all general commercial and industrial applications.

Standard Permissible Input Voltage Window Options

SWING-SES-H-S

> View Input Voltage Swings

In situations where there is a reasonably good mains supply, a Stabiliser offering an input variation swing of ±15% (S15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the Stabiliser.

TIP - The wider the permissible input voltage window you wish the Stabiliser to accomodate and the more accurate the voltage you require on the output, the more expensive the Stabiliser. So, when selecting the most appropriate and cost efficient model for your application, it pays to know the state of the utility mains supply on site and the designed input voltage tolerances of the load equipment you wish to protect.

 

Downloads

General Series eCatalogue View eCatalogue
PDF Series Catalogue  Download PDF
Guide Specification MS Word Document
Servo Electronic Overview eBrochure View eCatalogue
Servo Electronic Overview PDF Brochure Download PDF

 

Pricing

To obtain a personal price, or to discuss further how we might be able to help your organisation, please feel free

 to either e-mail us
 or call us on +44 (0)870 240 6162

Get ADOBE READER  Get Adobe Flash Player

General Technical Specification

  Technology:

Servo Electronic- Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).

Permissible Input Voltage Window Options >

 

220V or 230V or 240V, Single Phase, 2 Wire, (1 Phase + Neutral + G/E)

With Output Voltage Accuracy

±1%

±3%

±5%

Ratings

Data Sheet

*S15 Models– Input Window

± 15%

-17% /+18%

-19% /+21%

1 to 100 kVA

pdf

*S20 Models– Input Window

± 20%

-22% / +23%

-24% / +26%

1 to 75 kVA

pdf

*S25 Models– Input Window

± 25%

-27% / +28%

-29% / +31%

1 to 60 kVA

pdf

*S30 Models– Input Window

± 30%

-32% / +33%

-34% / +36%

1 to 50 kVA

pdf

*S35 Models– Input Window

± 35%

-37% / +38%

-39% / +41%

1 to 40 kVA

pdf

*S40 Models– Input Window

± 40%

-42% / +43%

-44% / +46%

1 to 30 kVA

pdf

 Output Voltage:

Presettable for any voltage between 220V, 230V or 240V (Customer to Specify), Single Phase, 2 Wire, (1 Phase + Neutral + G/E).

The permissible input voltage window is relative to the pre-set output voltage.

  Output Voltage Accuracy:

± 1%, ± 3% or ± 5% - auto selection based on input voltage swing

  Frequency:

47 to 65 Hz

  Response Time:

< 1.5 ms

  Correction Time:

A 10% supply variation will be corrected to within 2.5% in 0.6 seconds.

  Efficiency:

98%

  Power Factor:

Any Lagging to 0.95 leading

  Surge Ratings:

10 x max current rating for 2 seconds

 

3 x max current rating for 1 minute

 

2 x max current rating for 5 minutes

  Surge Suppression:

TVSS - Protects loads against high energy Spikes and Transient Voltages

  Total Harmonic Distortion:

 < 1%

  Soft-Switch-On:

Ensures the output voltage is set to a minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start-up voltage surges.

  Environment:

Temperature Range -15°to 45° C

 

Derate by 2% for each additional °C up to max 60°C

 

Suitable for indoor tropical use 95% RH (non-condensing)

 

Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

  Paint Colour:

RAL 7032 (Grey - Powder Coat)

  Construction:

Enclosures to IP20 (NEMA 1 Style), BS EN 60529

  Conformance:

Complies with BS EN 55022 and the relevant parts of BS EN 61000 series of standards

  CE Conformity:

 

 

CE Marked - being fully compliant with European Union Directives 2004/108/EC (replaced EMC Directive 89/336/EEC from July 2009) and 2006/95/EC (The Low Voltage Directive in force from January 2007)

  Warranty:

Three (3) Years / Thirty Six (36) Months from date of supply.

 

  Standard Features:

016A Style Enclosures

102 to 106 Style Enclosures

- Input Circuit Breaker

- Input Circuit Breaker

- Input Output Terminals

- Input Output Terminals

- Bypass Control Switch

- Bypass Control Switch

- Universal Output Socket

- Output Voltmeter & Ammeter

- Freestanding Enclosure

- Freestanding Enclosure on Castors

 

  Optional Accessories:

Over / Low Voltage Protection

 

Output Voltmeter & Ammeter (016A)

 

Output Breaker

 

No Volt Contacts

 

Inbuilt Manual Maintenance Bypass Switch

 

Lightning Surge Arrestors

 

Digital Power Metering - showing V, A, W, VA, AER, PF & KWH (with RS-482 Interface)

 

AquaStop Protective Coating - protection against damp and moisture ingress

 

 

Please Note– These Stabilisers are not designed to support / protect voltage “back feed” applications, where energy is required to be also fed back into the utility supply.

S15 Models - Input Voltage Swing +/-15% - 1 to 100 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@220V @230V @240V
1 kVA 4.5 4.3 4.2 SES-1H-S15 016A 210 x 260 x 420 20
2 kVA 9.1 8.7 8.3 SES-2H-S15 016A 210 x 260 x 420 20.5
3 kVA 13.6 13.0 12.5 SES-3H-S15 016A 210 x 260 x 420 21
4 kVA 18 17 16 SES-4H-S15 016A 210 x 260 x 420 22.5
5 kVA 23 22 21 SES-5H-S15 016A 210 x 260 x 420 23
8 kVA 36 35 33 SES-8H-S15 016A 210 x 260 x 420 29
10 kVA 46 44 42 SES-10H-S15 016A 210 x 260 x 420 30
15 kVA 66 65 63 SES-15H-S15 102 270 x 460 x 490 52
20 kVA 91 87 83 SES-20H-S15 102 270 x 460 x 490 56
30 kVA 136 130 125 SES-30H-S15 104A 500 x 700 x 600 110
40 kVA 182 174 167 SES-40H-S15 104A 500 x 700 x 600 120
50 kVA 227 217 208 SES-50H-S15 104 500 x 900 x 600 140
60 kVA 273 261 250 SES-60H-S15 105 600 x 1170 x 700 220
75 kVA 341 326 313 SES-75H-S15 105 600 x 1170 x 700 240
100 kVA 455 435 417 SES-100H-S15 105 600 x 1170 x 700 260
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S20 Models - Input Voltage Swing +/-20% - 1 to 75 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@220V @230V @240V
1 kVA 4.5 4.3 4.2 SES-1H-S20 016A 210 x 260 x 420 22
2 kVA 9.1 8.7 8.3 SES-2H-S20 016A 210 x 260 x 420 22.5
3 kVA 13.6 13.0 12.5 SES-3H-S20 016A 210 x 260 x 420 23
4 kVA 18 17 16 SES-4H-S20 016A 210 x 260 x 420 26.5
5 kVA 23 22 21 SES-5H-S20 016A 210 x 260 x 420 27
8 kVA 36 35 33 SES-8H-S20 102 270 x 460 x 490 49
10 kVA 46 44 42 SES-10H-S20 102 270 x 460 x 490 50
15 kVA 66 65 63 SES-15H-S20 102 270 x 460 x 490 60
20 kVA 91 87 83 SES-20H-S20 103 400 x 580 x 500 84
30 kVA 136 130 125 SES-30H-S20 104A 500 x 700 x 600 124
40 kVA 182 174 167 SES-40H-S20 105 600 x 1170 x 700 200
50 kVA 227 217 208 SES-50H-S20 105 600 x 1170 x 700 230
60 kVA 273 261 250 SES-60H-S20 105 600 x 1170 x 700 250
75 kVA 341 326 313 SES-75H-S20 106 700 x 1400 x 800 290
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S25 Models - Input Voltage Swing +/-25% - 1 to 60 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@220V @230V @240V
1 kVA 4.5 4.3 4.2 SES-1H-S25 016A 210 x 260 x 420 24
2 kVA 9.1 8.7 8.3 SES-2H-S25 016A 210 x 260 x 420 24.5
3 kVA 13.6 13.0 12.5 SES-3H-S25 016A 210 x 260 x 420 25
4 kVA 18 17 16 SES-4H-S25 016A 210 x 260 x 420 29
5 kVA 23 22 21 SES-5H-S25 016A 210 x 260 x 420 30
8 kVA 36 35 33 SES-8H-S25 102 270 x 460 x 490 53
10 kVA 46 44 42 SES-10H-S25 102 270 x 460 x 490 56
15 kVA 66 65 63 SES-15H-S25 102 400 x 580 x 500 84
20 kVA 91 87 83 SES-20H-S25 104A 500 x 700 x 600 120
30 kVA 136 130 125 SES-30H-S25 105 600 x 1170 x 700 220
40 kVA 182 174 167 SES-40H-S25 105 600 x 1170 x 700 240
50 kVA 227 217 208 SES-50H-S25 105 600 x 1170 x 700 260
60 kVA 273 261 250 SES-60H-S25 106 700 x 1400 x 800 290
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S30 Models - Input Voltage Swing +/-30% - 1 to 50 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@220V @230V @240V
1 kVA 4.5 4.3 4.2 SES-1H-S30 016A 210 x 260 x 420 28
2 kVA 9.1 8.7 8.3 SES-2H-S30 016A 210 x 260 x 420 28.5
3 kVA 13.6 13.0 12.5 SES-3H-S30 016A 210 x 260 x 420 29
4 kVA 18 17 16 SES-4H-S30 102 270 x 460 x 490 50
5 kVA 23 22 21 SES-5H-S30 102 270 x 460 x 490 52
8 kVA 36 35 33 SES-8H-S30 102 270 x 460 x 490 66
10 kVA 46 44 42 SES-10H-S30 102 270 x 460 x 490 68
15 kVA 66 65 63 SES-15H-S30 104A 500 x 700 x 600 104
20 kVA 91 87 83 SES-20H-S30 104 500 x 900 x 600 132
30 kVA 136 130 125 SES-30H-S30 105 600 x 1170 x 700 220
40 kVA 182 174 167 SES-40H-S30 105 600 x 1170 x 700 260
50 kVA 227 217 208 SES-50H-S30 106 700 x 1400 x 800 370
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S35 Models - Input Voltage Swing +/-35% - 1 to 40 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@220V @230V @240V
1 kVA 4.5 4.3 4.2 SES-1H-S35 016A 210 x 260 x 420 29
2 kVA 9.1 8.7 8.3 SES-2H-S35 016A 210 x 260 x 420 30
3 kVA 13.6 13.0 12.5 SES-3H-S35 016A 210 x 260 x 420 31
4 kVA 18 17 16 SES-4H-S35 102 270 x 460 x 490 54
5 kVA 23 22 21 SES-5H-S35 102 270 x 460 x 490 56
8 kVA 36 35 33 SES-8H-S35 103 400 x 580 x 500 76
10 kVA 46 44 42 SES-10H-S35 103 400 x 580 x 500 78
15 kVA 66 65 63 SES-15H-S35 104 500 x 900 x 600 130
20 kVA 91 87 83 SES-20H-S35 105 600 x 1170 x 700 220
30 kVA 136 130 125 SES-30H-S35 105 600 x 1170 x 700 240
40 kVA 182 174 167 SES-40H-S35 106 700 x 1400 x 800 310
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S40 Models - Input Voltage Swing +/-40% - 1 to 30 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@220V @230V @240V
1 kVA 4.5 4.3 4.2 SES-1H-S40 016A 210 x 260 x 420 33
2 kVA 9.1 8.7 8.3 SES-2H-S40 016A 210 x 260 x 420 34
3 kVA 13.6 13.0 12.5 SES-3H-S40 016A 210 x 260 x 420 35
4 kVA 18 17 16 SES-4H-S40 102 270 x 460 x 490 54
5 kVA 23 22 21 SES-5H-S40 102 270 x 460 x 490 56
8 kVA 36 35 33 SES-8H-S40 104A 500 x 700 x 600 118
10 kVA 46 44 42 SES-10H-S40 104A 500 x 700 x 600 120
15 kVA 66 65 63 SES-15H-S40 105 600 x 1170 x 700 220
20 kVA 91 87 83 SES-20H-S40 105 600 x 1170 x 700 240
30 kVA 136 130 125 SES-30H-S40 106 700 x 1400 x 800 310
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

Standard Enclosure Types

SES Single Phase AC Voltage StabilizersSolid and Robust Construction

SES Series Single Phase AC Voltage Stabilisers are housed in robust air-cooled IP20 (IEC/BS/EN 60529) / NEMA 1 floor standing steel cubicles, primarily intended for indoor use. These enclosures offer removable panels for ease of installation and servicing.

 

  016A Style Enclosure
   Bottom & Rear Cable Entry
016 Style Enclosures 
 
   Physical Sizes:
016A 210(W) x 260(H) x 420(D)mm 8.3"(W) x 10.3"(H) x 16.6"(D) inches

 

  102 Style Enclosure
   On Castors - Bottom Cable Entry
102 Style Enclosure 
 
   Physical Sizes:
102 270(W) x 460(H) x 490(D)mm 10.7"(W) x 18.2"(H) x 19.3"(D) inches

 

  103 Style Enclosure
   On CastorsBottom Cable Entry
103 Style Enclosure 
   
   Physical Size:
103 400(W) x 580(H) x 500(D)mm 15.8"(W) x 22.9"(H) x 19.7"(D) inches

 

  104A, 104, 105 & 106 Style Enclosures
   On Castors - Bottom Cable Entry
104 - 106 Style Enclosures 
 
   Physical Sizes:
104A 500(W) x 700(H) x 600(D)mm 19.7"(W) x 27.6"(H) x 23.7"(D) inches
104 500(W) x 900(H) x 600(D)mm 19.7"(W) x 35.5"(H) x 23.7"(D) inches
105 600(W) x 1170(H) x 700(D)mm 23.7"(W) x 46.1"(H) x 27.6"(D) inches
106 700(W) x 1400(H) x 800(D)mm 27.6"(W) x 55.2"(H) x 31.5"(D) inches

 

 
   Note:    Also available in IP54 / NEMA 3 Style Enclosure - see OSES-H-S Series
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.


     Copyright © Ashley-Edison (UK) reserves the right to change any or all of the specifications indicated or implied without prior notice. E&OE

Introduction

 US Voltages

SES-L-S Series - 1 to 50 kVA
Single Phase Servo Electronic AC Voltage Stabilizers

1P 2W Solution

Input / Output:  100V, 110V, 115V, 120V & 127V AC  -  50/60Hz


Our most popular and feature rich Single Phase offering configured for US voltages. Ideal for over 95% of all general commercial and industrial applications. 

Standard Permissible Input Voltage Window Options

SWING-SES-L-S

> View Input Voltage Swings

In situations where there is a reasonably good mains supply, a Stabilizer offering an input variation swing of ±15% (S15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the Stabilizer.

TIP - The wider the permissible input voltage window you wish the Stabilizer to accommodate and the more accurate the voltage you require on the output, the more expensive the Stabilizer. So, when selecting the most appropriate and cost-efficient model for your application, it pays to know the state of the utility mains supply on site and the designed input voltage tolerances of the load equipment you wish to protect.

 

Downloads

General Series eCatalog View eCatalog
PDF Series Catalog Download PDF
Guide Specification MS Word Document
Servo Electronic Overview eBrochure View eBrochure
Servo Electronic Overview PDF Brochure Download PDF
 

Pricing

To obtain a personal price, or to discuss further how we might be able to help your organisation, please feel free

 to either e-mail us
 or call us on +44 (0)870 240 6162

Get ADOBE READER  Get Adobe Flash Player

General Technical Specification

 Technology:

Servo Electronic- Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).

Permissible Input Voltage Window Options >

 

100V or 110V or 115V or 120V or 127V  Single Phase, 2 Wire, (1 Phase + Neutral + G/E)

With Output Voltage Accuracy

±1%

±3%

±5%

Ratings

Data Sheet

*S15 Models– Input Window

± 15%

-17% /+18%

-19% /+21%

1 to 50 kVA

pdf

*S20 Models– Input Window

± 20%

-22% / +23%

-24% / +26%

1 to 40 kVA

pdf

*S25 Models– Input Window

± 25%

-27% / +28%

-29% / +31%

1 to 40 kVA

pdf

*S30 Models– Input Window

± 30%

-32% / +33%

-34% / +36%

1 to 30 kVA

pdf

  Output Voltage:

Presettable for any voltage between 100V, 110V, 115V, 120V or 127V Single Phase, 2 Wire, (1 Phase + Neutral + G/E)
The permissible input voltage window is relative to the pre-set output voltage.

  Output Voltage Accuracy:

± 1%, ± 3% or ± 5% - auto selection based on input voltage swing

  Frequency:

47 to 65 Hz

  Response Time:

< 1.5 ms

  Correction Time:

A 10% supply variation will be corrected to within 2.5% in 0.6 seconds.

  Efficiency:

98%

  Power Factor:

Any Lagging to 0.95 leading

  Surge Ratings:

10 x max current rating for 2 seconds

 

3 x max current rating for 1 minute

 

2 x max current rating for 5 minutes

  Surge Suppression:

TVSS - Protects loads against high energy Spikes and Transient Voltages

  Total Harmonic Distortion:

 < 1%

  Soft-Switch-On:

Ensures the output voltage is set to a minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start-up voltage surges.

  Environment:

Temperature Range -15°to 45° C

 

Derate by 2% for each additional °C up to max 60°C

 

Suitable for indoor tropical use 95% RH (non-condensing)

 

Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

  Paint Colour:

RAL 7032 (Grey - Powder Coat)

  Construction:

Enclosures to IP20 (NEMA 1 Style), BS EN 60529

  Conformance:

Complies with BS EN 55022 and the relevant parts of BS EN 61000 series of standards

  CE Conformity:

CE Marked - being fully compliant with European Union Directives 2004/108/EC (replaced EMC Directive 89/336/EEC from July 2009) and 2006/95/EC (The Low Voltage Directive in force from January 2007)

  Warranty:

Three (3) Years / Thirty Six (36) Months from date of supply.

 

  Standard Features:

016A Style Enclosures

102 to 106 Style Enclosures

- Input Circuit Breaker

- Input Circuit Breaker

- Input Output Terminals

- Input Output Terminals

- Bypass Control Switch

- Bypass Control Switch

- Universal Output Socket

- Output Voltmeter & Ammeter

- Freestanding Enclosure

- Freestanding Enclosure on Castors

 

  Optional Accessories:

Over / Low Voltage Protection

 

Output Voltmeter & Ammeter (016A)

 

Output Breaker

 

No Volt Contacts

 

Inbuilt Manual Maintenance Bypass Switch

 

Lightning Surge Arrestors

 

Digital Power Metering - showing V, A, W, VA, AER, PF & KWH (with RS-482 Interface)

 

AquaStop Protective Coating - protection against damp and moisture ingress

 

 

Please Note– These Stabilisers are not designed to support / protect voltage “back feed” applications, where energy is required to be also fed back into the utility supply.

S15 Models - Input Voltage Swing +/-15% - 1 to 50 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
1 kVA 10.0 9.1 8.7 8.3  7.9 SES-1L-S15 016A 210 x 260 x 420 19
2 kVA 20.0 18.2 17.4 16.7 15.7 SES-2L-S15 016A 210 x 260 x 420 19.5
3 kVA 30 27 26  25 23 SES-3L-S15 016A 210 x 260 x 420 20
4 kVA 40 36 34 33 31 SES-4L-S15 016A 210 x 260 x 420 22
5 kVA 50 45 43 41 39 SES-5L-S15 016A 210 x 260 x 420 23
8 kVA 80 72 69 66 63 SES-8L-S15 102 270 x 460 x 490 44
10 kVA 100 90 87 83 78 SES-10L-S15 102 270 x 460 x 490 46
15 kVA 150 136 130 125 118 SES-15L-S15 103 400 x 580 x 500 56
20 kVA 200 181 173 166 157 SES-20L-S15 103 400 x 580 x 500 75
30 kVA 300 272 260 250 236 SES-30L-S15 104 500 x 900 x 600 132
40 kVA 400 363 347 333 315 SES-40L-S15 105 600 x 1170 x 700 220
50 kVA 500 454 434 416 393 SES-50L-S15 105 600 x 1170 x 700 240
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S20 Models - Input Voltage Swing +/-20% - 1 to 40 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
1 kVA 10.0 9.1 8.7 8.3  7.9 SES-1L-S20 016A 210 x 260 x 420 22
2 kVA 20.0 18.2 17.4 16.7 15.7 SES-2L-S20 016A 210 x 260 x 420 22.5
3 kVA 30 27 26  25 23 SES-3L-S20 016A 210 x 260 x 420 23
4 kVA 40 36 34 33 31 SES-4L-S20 016A 210 x 260 x 420 25
5 kVA 50 45 43 41 39 SES-5L-S20 016A 210 x 260 x 420 26
8 kVA 80 72 69 66 63 SES-8L-S20 102 270 x 460 x 490 51
10 kVA 100 90 87 83 78 SES-10L-S20 102 270 x 460 x 490 53
15 kVA 150 136 130 125 118 SES-15L-S20 103 400 x 580 x 500 73
20 kVA 200 181 173 166 157 SES-20L-S20 104 500 x 900 x 600 109
30 kVA 300 272 260 250 236 SES-30L-S20 105 600 x 1170 x 700 235
40 kVA 400 363 347 333 315 SES-40L-S20 105 600 x 1170 x 700 260
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S25 Models - Input Voltage Swing +/-25% - 1 to 40 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
1 kVA 10.0 9.1 8.7 8.3  7.9 SES-1L-S25 016A 210 x 260 x 420 24
2 kVA 20.0 18.2 17.4 16.7 15.7 SES-2L-S25 016A 210 x 260 x 420 24.5
3 kVA 30 27 26  25 23 SES-3L-S25 016A 210 x 260 x 420 25
4 kVA 40 36 34 33 31 SES-4L-S25 102 270 x 460 x 490 43
5 kVA 50 45 43 41 39 SES-5L-S25 102 270 x 460 x 490 44
8 kVA 80 72 69 66 63 SES-8L-S25 103 400 x 580 x 500 71
10 kVA 100 90 87 83 78 SES-10L-S25 103 400 x 580 x 500 73
15 kVA 150 136 130 125 118 SES-15L-S25 104A 500 x 700 x 600 130
20 kVA 200 181 173 166 157 SES-20L-S25 105 600 x 1170 x 700 220
30 kVA 300 272 260 250 236 SES-30L-S25 105 600 x 1170 x 700 260
40 kVA 400 363 347 333 315 SES-40L-S25 106 700 x 1400 x 800 400
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

S30 Models - Input Voltage Swing +/-30% - 1 to 30 kVA

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
1 kVA 10.0 9.1 8.7 8.3  7.9 SES-1L-S30 016A 210 x 260 x 420 26
2 kVA 20.0 18.2 17.4 16.7 15.7 SES-2L-S30 016A 210 x 260 x 420 27
3 kVA 30 27 26  25 23 SES-3L-S30 016A 210 x 260 x 420 29
4 kVA 40 36 34 33 31 SES-4L-S30 102 270 x 460 x 490 50
5 kVA 50 45 43 41 39 SES-5L-S30 102 270 x 460 x 490 52
8 kVA 80 72 69 66 63 SES-8L-S30 103 400 x 580 x 500 75
10 kVA 100 90 87 83 78 SES-10L-S30 103 400 x 580 x 500 78
15 kVA 150 136 130 125 118 SES-15L-S30 104A 500 x 700 x 600 150
20 kVA 200 181 173 166 157 SES-20L-S30 105 600 x 1170 x 700 240
30 kVA 300 272 260 250 236 SES-30L-S30 106 700 x 1400 x 900 380
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

Standard Enclosure Types

SES Single Phase AC Voltage StabilizersSolid and Robust Construction

SES Series Single Phase AC Voltage Stabilisers are housed in robust air-cooled IP20 (IEC/BS/EN 60529) / NEMA 1 floor standing steel cubicles, primarily intended for indoor use. These enclosures offer removable panels for ease of installation and servicing.

 

  016A Style Enclosure
   Bottom & Rear Cable Entry
016 Style Enclosures 
 
   Physical Sizes:
016A 210(W) x 260(H) x 420(D)mm 8.3"(W) x 10.3"(H) x 16.6"(D) inches

 

  102 Style Enclosure
   On Castors - Bottom Cable Entry
102 Style Enclosure 
 
   Physical Sizes:
102 270(W) x 460(H) x 490(D)mm 10.7"(W) x 18.2"(H) x 19.3"(D) inches

 

  103 Style Enclosure
   On CastorsBottom Cable Entry
103 Style Enclosure 
   
   Physical Size:
103 400(W) x 580(H) x 500(D)mm 15.8"(W) x 22.9"(H) x 19.7"(D) inches

 

  104A, 104, 105 & 106 Style Enclosures
   On Castors - Bottom Cable Entry
104 - 106 Style Enclosures 
 
   Physical Sizes:
104A 500(W) x 700(H) x 600(D)mm 19.7"(W) x 27.6"(H) x 23.7"(D) inches
104 500(W) x 900(H) x 600(D)mm 19.7"(W) x 35.5"(H) x 23.7"(D) inches
105 600(W) x 1170(H) x 700(D)mm 23.7"(W) x 46.1"(H) x 27.6"(D) inches
106 700(W) x 1400(H) x 800(D)mm 27.6"(W) x 55.2"(H) x 31.5"(D) inches

 

 
   Note:    Also available in IP54 / NEMA 3 Style Enclosure - see OSES-L-S Series
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.


     Copyright © Ashley-Edison (UK) reserves the right to change any or all of the specifications indicated or implied without prior notice. E&OE

Introduction


SES-HL-S Series - 1 to 40 kVA
Single Phase Servo Electronic Step-Down AC Voltage Stabilisers / Voltage Converters

3P 4W Solution

Input:      220V, 230V or 240V AC -  50/60Hz

Output:   100V, 110V, 115V, 120V or 127V AC -  50/60Hz

 

Step-Down Voltage Converters which also deliver protection against the vagaries of voltage fluctuations on the input utility supply. Ideal for applications where the utility supply voltage is different from the load equipment’s requirement eg. US designed equipment used in Europe.

Standard Permissible Input Voltage Window Options

SWING-SES-HL-S

View Input Voltage Swings

In situations where there is a reasonably good mains supply, a Stabiliser offering an input variation swing of ±15% (S15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the Stabiliser.

TIP - The wider the permissible input voltage window you wish the Stabiliser to accomodate and the more accurate the voltage you require on the output, the more expensive the Stabiliser. So, when selecting the most appropriate and cost efficient model for your application, it pays to know the state of the utility mains supply on site and the designed input voltage tolerances of the load equipment you wish to protect.

 

Downloads

General Series eCatalogue View eCatalogue
PDF Series Catalogue Download PDF
Guide Specification MS Word Document
Servo Electronic Overview eBrochure View eCatalogue
Servo Electronic Overview PDF Brochure Download PDF
 

Pricing

To obtain a personal price, or to discuss further how we might be able to help your organisation, please feel free

 to either e-mail us
 or call us on +44 (0)870 240 6162

Get ADOBE READER  Get Adobe Flash Player

Model Ratings (kVA/Amps)

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@100V @110V @115V @120V @127V
1 kVA 10.0 9.1 8.7 8.3  7.9 SES-1HL-S*

Dimensions, Weights and precise Standard and Optional Features as per the relevant S* model data sheet or upon request.

 

 

NB: FREQUENCY CONVERSION - Where Frequency Conversion  is also required a separate standalone Frequency Converter will be required

 
2 kVA 20.0 18.2 17.4 16.7 15.7 SES-2HL-S*
3 kVA 30 27 26  25 23 SES-3HL-S*
4 kVA 40 36 34 33 31 SES-4HL-S*
5 kVA 50 45 43 41 39 SES-5HL-S*
8 kVA 80 72 69 66 63 SES-8HL-S*
10 kVA 100 90 87 83 78 SES-10HL-S*
15 kVA 150 136 130 125 118 SES-15HL-S*
20 kVA 200 181 173 166 157 SES-20HL-S*
30 kVA 300 272 260 250 236 SES-30HL-S*
40 kVA 400 363 347 333 315 SES-40HL-S*
50 kVA 500 454 434 416 393 SES-50L-S*
 
   S* = Selected permissible input voltage window - S15 (±15%), S20 (±20%), S25 (±25%), S30 (±30%), S35 (±35%) or S40 (±40%)
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

General Technical Specification

 Technology:

Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).

Permissible Input Voltage Window Options >

 

220V or 230V or 240V  Single Phase, 2 Wire, (1 Phase + Neutral + G/E)

With Output Voltage Accuracy

±1%

±3%

±5%

Ratings

*S15 Models– Input Window

± 15%

-17% /+18%

-19% /+21%

1 to 40 kVA

*S20 Models– Input Window

± 20%

-22% / +23%

-24% / +26%

1 to 40 kVA

*S25Models– Input Window

± 25%

-27% / +28%

-29% / +31%

1 to 40 kVA

*S30 Models– Input Window

± 30%

-32% / +33%

-34% / +36%

1 to 30 kVA

*S35 Models– Input Window

± 35%

-37% / +38%

-39% / +41%

1 to 20 kVA

*S40 Models– Input Window

± 40%

-42% / +43%

-44% / +46%

1 to 20 kVA

  Output Voltage:

100V, 110V, 115V, 120V or 127V AC  (Customer to Specify) – Single Phase, 2 Wire, (1 Phase + Neutral + G/E)

  Output Voltage Accuracy:

± 1%, ± 3% or ± 5% - auto selection based on input voltage swing

  Frequency:

47 to 65 Hz

  Response Time:

< 1.5 ms

  Correction Time:

A 10% supply variation will be corrected to within 2.5% in 0.6 seconds.

  Efficiency:

98%

  Power Factor:

Any Lagging to 0.95 leading

  Surge Ratings:

10 x max current rating for 2 seconds

 

3 x max current rating for 1 minute

 

2 x max current rating for 5 minutes

  Surge Suppression:

TVSS - Protects loads against high energy Spikes and Transient Voltages

  Total Harmonic Distortion:

 < 1%

  Soft-Switch-On:

Ensures the output voltage is set to a minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start-up voltage surges.

  Environment:

Temperature Range -15°to 45° C

 

Derate by 2% for each additional °C up to max 60°C

 

Suitable for indoor tropical use 95% RH (non-condensing)

 

Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

  Paint Colour:

RAL 7032 (Grey - Powder Coat)

  Construction:

Enclosures to IP20 (NEMA 1 Style), BS EN 60529

  Conformance:

Complies with BS EN 55022 and the relevant parts of BS EN 61000 series of standards

  CE Conformity:

CE Marked - being fully compliant with European Union Directives 2004/108/EC (replaced EMC Directive 89/336/EEC from July 2009) and 2006/95/EC (The Low Voltage Directive in force from January 2007)

  Warranty:

Three (3) Years / Thirty Six (36) Months from date of supply.

   Standard Features:

016AE Style Enclosures

103 to 106 Style Enclosures

- Input Circuit Breaker

- Input Circuit Breaker

- Input Output Terminals

- Input Output Terminals

- Bypass Control Switch

- Bypass Control Switch

- Universal Output Socket

- Output Voltmeter & Ammeter

- Freestanding Enclosure

- Freestanding Enclosure on Castors

 

  Optional Accessories:

Over / Low Voltage Protection

 

Output Voltmeter & Ammeter (016A)

 

Output Breaker

 

No Volt Contacts

 

Inbuilt Manual Maintenance Bypass Switch

 

Lightning Surge Arrestors

 

Digital Power Metering - showing V, A, W, VA, AER, PF & KWH (with RS-482 Interface)

 

AquaStop Protective Coating - protection against damp and moisture ingress

 

 

Please Note – These Stabilisers are not designed to support / protect voltage “back feed” applications, where energy is required to be also fed back into the utility supply.

Standard Enclosure Types

SES HL / LH Single Phase AC Voltage StabilizersSolid and Robust Construction

SES Series Single Phase AC Voltage Stabilisers are housed in robust air-cooled IP20 (IEC/BS/EN 60529) / NEMA 1 floor standing steel cubicles, primarily intended for indoor use. These enclosures offer removable panels for ease of installation and servicing.

 

  016AE Style Enclosure
   On-Castors - Bottom Cable Entry
016AE Style Enclosure 
 
   Physical Sizes:
016AE 210(W) x 630(H) x 420(D)mm 8.3"(W) x 24.9"(H) x 16.6"(D) inches

 

 

  103 Style Enclosure
   On CastorsBottom Cable Entry
103 Style Enclosure 
   
   Physical Size:
103 400(W) x 580(H) x 500(D)mm 15.8"(W) x 22.9"(H) x 19.7"(D) inches

 

 

  104A, 104, 105 & 106 Style Enclosures
   On Castors - Bottom Cable Entry
104 - 106 Style Enclosures 
 
   Physical Sizes:
104A 500(W) x 700(H) x 600(D)mm 19.7"(W) x 27.6"(H) x 23.7"(D) inches
104 500(W) x 900(H) x 600(D)mm 19.7"(W) x 35.5"(H) x 23.7"(D) inches
105 600(W) x 1170(H) x 700(D)mm 23.7"(W) x 46.1"(H) x 27.6"(D) inches
106 700(W) x 1400(H) x 800(D)mm 27.6"(W) x 55.2"(H) x 31.5"(D) inches

 

 
   Note:    Also available in IP54 / NEMA 3 Style Enclosure - see OSES-HL-S Series
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.


     Copyright © Ashley-Edison (UK) reserves the right to change any or all of the specifications indicated or implied without prior notice. E&OE

Introduction

US Voltages

SES-LH-S Series - 1 to 30 kVA
Single Phase Servo Electronic Step-Up AC Voltage Stabilizers / Voltage Converters

 3P 4W Solution

Input:     100V, 110V, 115V, 120V or 127V AC -  50/60Hz

Output:  220V, 230V or 240V AC -  50/60Hz

 

Step-Up Voltage Converters which also deliver protection against the vagaries of voltage fluctuations on the input utility supply. Ideal for applications where the utility supply voltage is different from the load equipment’s requirement.

Standard Permissible Input Voltage Window Options

SWING-SES-LH-3P-S

> View Input Voltage Swings

In situations where there is a reasonably good mains supply, a Stabilizer offering an input variation swing of ±15% (S15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the Stabilizer.

TIP - The wider the permissible input voltage window you wish the Stabilizer to accomodate and the more accurate the voltage you require on the output, the more expensive the Stabilizer. So, when selecting the most appropriate and cost efficient model for your application, it pays to know the state of the utility mains supply on site and the designed input voltage tolerances of the load equipment you wish to protect.

 

Downloads

General Series eCatalog View eCatalog
PDF Series Catalog Download PDF
Guide Specification MS Word Document
Servo Electronic Overview eBrochure View eBrochure
Servo Electronic Overview  PDF Brochure Download PDF
 

Pricing

To obtain a personal price, or to discuss further how we might be able to help your organisation, please feel free

 to either e-mail us
 or call us on +44 (0)870 240 6162

Get ADOBE READER  Get Adobe Flash Player

Model Ratings (kVA/Amps)

Power
Rating
kVA

Max. Amps

 


















AE Model No: 

Enclosure
Style / Type

Dimensions
W x H x D (mm)

Weight
(Kgs)

@220V @230V @240V
1 kVA 4.5 4.3 4.2 SES-1LH-S15

Dimensions, Weights and precise Standard and Optional Features as per the relevant S* model data sheet or upon request.

 

NB: FREQUENCY CONVERSION - Where Frequency Conversion is also required a separate standalone Frequency Converter will be required.

2 kVA 9.1 8.7 8.3 SES-2LH-S15
3 kVA 13.6 13.0 12.5 SES-3LH-S15
4 kVA 18 17 16 SES-4LH-S15
5 kVA 23 22 21 SES-5LH-S15
8 kVA 36 35 33 SES-8LH-S15
10 kVA 46 44 42 SES-10LH-S15
15 kVA 66 65 63 SES-15LH-S15
20 kVA 91 87 83 SES-20LH-S15
30 kVA 136 130 125 SES-30LH-S15
 
   S* = Selected permissible input voltage window - S15 (±15%), S20 (±20%), S25 (±25%), S30 (±30%), S35 (±35%) or S40 (±40%)
 
   Note:    Other voltage configurations available upon enquiry / order. 
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.

General Technical Specification

 Technology:

Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).

Permissible Input Voltage Window Options >

 

100V or 110V or 115V or 120V or 127V AC, 2 Wire, (1 Phase + Neutral + G/E)

With Output Voltage Accuracy

±1%

±3%

±5%

Ratings

*S15 Models– Input Window

± 15%

-17% /+18%

-19% /+21%

1 to 30 kVA

*S20 Models– Input Window

± 20%

-22% / +23%

-24% / +26%

1 to 30 kVA

*S25 Models– Input Window

± 25%

-27% / +28%

-29% / +31%

1 to 30 kVA

*S30 Models– Input Window

± 30%

-32% / +33%

-34% / +36%

1 to 20 kVA

*S35 Models– Input Window

± 35%

-37% / +38%

-39% / +41%

1 to 15 kVA

*S40 Models– Input Window

± 40%

-42% / +43%

-44% / +46%

1 to 15 kVA

  Output Voltage:

220V, 230V or 240V AC  (Customer to Specify) –2 Wire, (1 Phase + Neutral + G/E)

The permissible input voltage window is relative to the pre-set output voltage.

  Output Voltage Accuracy:

± 1%, ± 3% or ± 5% - auto selection based on input voltage swing

  Frequency:

47 to 65 Hz

  Response Time:

< 1.5 ms

  Correction Time:

A 10% supply variation will be corrected to within 2.5% in 0.6 seconds.

  Efficiency:

98%

  Power Factor:

Any Lagging to 0.95 leading

  Surge Ratings:

10 x max current rating for 2 seconds

 

3 x max current rating for 1 minute

 

2 x max current rating for 5 minutes

  Surge Suppression:

TVSS - Protects loads against high energy Spikes and Transient Voltages

  Total Harmonic Distortion:

 < 1%

  Soft-Switch-On:

Ensures the output voltage is set to a minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start-up voltage surges.

  Environment:

Temperature Range -15°to 45° C

 

Derate by 2% for each additional °C up to max 60°C

 

Suitable for indoor tropical use 95% RH (non-condensing)

 

Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

  Paint Colour:

RAL 7032 (Grey - Powder Coat)

  Construction:

Enclosures to IP20 (NEMA 1 Style), BS EN 60529

  Conformance:

Complies with BS EN 55022 and the relevant parts of BS EN 61000 series of standards

  CE Conformity:

CE Marked - being fully compliant with European Union Directives 2004/108/EC (replaced EMC Directive 89/336/EEC from July 2009) and 2006/95/EC (The Low Voltage Directive in force from January 2007)

  Warranty:

Three (3) Years / Thirty Six (36) Months from date of supply.

 

  Standard Features:

016AE Style Enclosures

103 to 106 Style Enclosures

- Input Circuit Breaker

- Input Circuit Breaker

- Input Output Terminals

- Input Output Terminals

- Bypass Control Switch

- Bypass Control Switch

- Universal Output Socket

- Output Voltmeter & Ammeter

- Freestanding Enclosure

- Freestanding Enclosure on Castors

 

  Optional Accessories:

Over / Low Voltage Protection

 

Output Voltmeter & Ammeter (016A)

 

Output Breaker

 

No Volt Contacts

 

Inbuilt Manual Maintenance Bypass Switch

 

Lightning Surge Arrestors

 

Digital Power Metering - showing V, A, W, VA, AER, PF & KWH (with RS-482 Interface)

 

AquaStop Protective Coating - protection against damp and moisture ingress

 

 

Please Note– These Stabilisers are not designed to support / protect voltage “back feed” applications, where energy is required to be also fed back into the utility supply.

Standard Enclosure Types

SES HL / LH Single Phase AC Voltage StabilizersSolid and Robust Construction

SES Series Single Phase AC Voltage Stabilisers are housed in robust air-cooled IP20 (IEC/BS/EN 60529) / NEMA 1 floor standing steel cubicles, primarily intended for indoor use. These enclosures offer removable panels for ease of installation and servicing.

 

  016AE Style Enclosure
   On-Castors - Bottom Cable Entry
016AE Style Enclosure 
 
   Physical Sizes:
016AE 210(W) x 630(H) x 420(D)mm 8.3"(W) x 24.9"(H) x 16.6"(D) inches

 

 

  103 Style Enclosure
   On CastorsBottom Cable Entry
103 Style Enclosure 
   
   Physical Size:
103 400(W) x 580(H) x 500(D)mm 15.8"(W) x 22.9"(H) x 19.7"(D) inches

 

 

  104A, 104, 105 & 106 Style Enclosures
   On Castors - Bottom Cable Entry
104 - 106 Style Enclosures 
 
   Physical Sizes:
104A 500(W) x 700(H) x 600(D)mm 19.7"(W) x 27.6"(H) x 23.7"(D) inches
104 500(W) x 900(H) x 600(D)mm 19.7"(W) x 35.5"(H) x 23.7"(D) inches
105 600(W) x 1170(H) x 700(D)mm 23.7"(W) x 46.1"(H) x 27.6"(D) inches
106 700(W) x 1400(H) x 800(D)mm 27.6"(W) x 55.2"(H) x 31.5"(D) inches

 

 
   Note:    Also available in IP54 / NEMA 3 Style Enclosure - see OSES-LH-S Series
  Optional Accessories added may affect dimensions and weights - subject to confirmation.
  For packed, sizes and weights please refer to the FAQ Section of this site.


     Copyright © Ashley-Edison (UK) reserves the right to change any or all of the specifications indicated or implied without prior notice. E&OE




This website uses 'cookies' to give you the best, most relevant experience. Using this website means you’re OK with this. You can change which cookies are set at any time - and find out more about them - by following this link, or by clicking the cookie link at the bottom of any page.
This message will close within 20 seconds.

Accept all cookies